2023 Case IH Speed-Tiller 475 27 ft. (8.25 m)

MoreLess
Limited Time Offer!

Selling Price -

2023 Case IH Speed-Tiller 475 27 ft. (8.25 m)

This high-speed disk is a true dual-season tool that cuts, sizes and incorporates high levels of crop residue, improving soil quality and maximizing crop yields. Available in a rigid mounted or trailing configuration.

The Speed-Tiller 475 has a trailing and folding configuration available in 20.5 ft to 41 ft widths.

Tackle Primary and Secondary Tillage With One Tool

Case IH Speed-Tiller 465/475 are high-speed tillage tools that dig like a disk and finish like a finisher — maximizing the agronomic quality of the seedbed from surface to floor, fall or spring. Featuring indexed, independently mounted blades, these high-speed disks are available in either rigid mounted or trailing configurations to meet the unique demands of each operation.

Every Detail Counts

There are countless features that set the Speed-Tiller apart from the rest. When it comes to agronomic performance and promoting higher yields, every detail counts. Here are just a few reasons why the Speed-Tiller beats the competition every time:

Agronomic Performance
  • Field-tested and proven as the only high-speed disk on the market worthy of the Case IH Agronomic Design™ badge.
  • Works the entire soil profile — and doesn’t create compacted valleys and humps below the surface of your fields like competitive units.
  • Designed to promote healthier soil and consistent, accurate seed placement.
Disk Arms & Gang Design
  • Disk arms are the heaviest and strongest on the market — nearly double the thickness of competitive units.
  • Double-taper roller bearings — one for each disk blade — feature a 7-lip seal for extreme ruggedness and extended service life.
  • Tapered bearings have the ability to handle both extreme radial loads and thrust loads, while standard roller bearings are only built to deal with radial loads.
Rugged Frame
  • It’s easy to see how much stronger and rugged the Speed-Tiller is built when comparing to the competition side by side.
  • A thicker and heavier frame helps increase durability.
  • Angled pieces in the frame design provide maximum strength.
Torsion System
  • 2-inch-thick, heavy-duty rubber torsions for disk arm mounts allow blades to hold their position through tough conditions and a range of speeds.
  • Smaller rubber torsions on competitive units mean less breakout force, improper disk spacing and increased wear.
  • Paired with the durable and heavy disk arms, the torsion system gives the disks superior soil penetration — while still being malleable enough to allow each disk to have 8 inches of vertical travel.
Cost of Ownership
  • The durability of the Speed-Tiller contributes to a lower cost per acre compared to competitors.
  • From the heavy-duty hub and bearing assembly, to durable Earth Metal blades, the Speed-Tiller is built to last — even in tough conditions
A True Dual-Season Tool

The Speed-Tiller digs like a disk and finishes like a finisher for flexibility no matter the season. In fall, run deeper — from 3 to 6 inches — to manage crop residue, control weeds and destroy root balls. In spring, run at shallower depths to create an ideal seedbed finish.

Depth Control
  • Exclusive constant-level hitch delivers deep penetration, consistent disk depth and residue management
  • Puts usable weight on the blades to run deeper or transitions to roller wheel to optimize tool finish
  • Wing down pressure provides consistent penetration and disk depth across the entire width to assure a high-efficiency seedbed
  • 2023
  • Case IH
  • Speed-Tiller 475
  • 27 ft. (8.25 m)
  • Seed Drill
  • 320–400 HP (238 – 298 kW)
  • Remote Valves: 4 (Fore/Aft Tilt, Main Lift, Wing Fold, Crumbler circuit) | Wing Down Pressure: down pressure w/ heavy duty rubber torsion system
  • 2,800 psi (19 000 kPa)
  • Blade Mounts: Individually mounted, heavy duty 1 1/4 in. (32 mm) thick arm with 2 in. (51 mm) high density rubber torsion system; lateral front gang adjustment
  • Qty. 2: 600 | Wing: Mechanically adjusted Stabilizer Wheel - 400
  • Blade Spacing: 0 in. (250 mm) spacing on each gang; 5 in. (125 mm) effective cut spacing | Blade Diameter: 24 in. (610 mm) std. concavity blades | Blade Thickness: 6 mm (0.236 in.) | Crumbler: 19 in. (480 mm) diameter with 1 7/16 in. (36.5 mm) rifled round bar crumbler | Rubber Roller: 21 in. (533 mm) diameter rubber roller with mud scrapers | Spring: 22 in. (550 mm) diameter heavy duty steel spring roller
  • Operating: 27 ft. (8.25 m)
  • 10.7 ft. (3.2 m)
  • 12.2 ft. (3.7 m)
  • 21,300 lb. (9 660 kg)
  • Depth Control: Cylinder stops for Wheels and Rollers and single point depth control for fore/aft tilt | Blade Bearings: Greaseless heavy duty double taper rolling bearing | Number of Blades: 66 | Mounting: Hydraulically positioned with heavy duty rubber torsion system and heavy duty bearings
  • Blade Design: Earth Metal Serrated front and rear blades
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Sidney, Montana
  • New
  • N4S261
  • 2023
  • Case IH
  • Speed-Tiller 475 27 ft. (8.25 m)
  • Available
  • Operating: 27 ft. (8.25 m)
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.